This article provides a comprehensive overview of all the features and improvements that have been implemented in each SmartSpeed Plus iOS release.
v1.17.0September 26 2024
New and enhanced features
- New firmware update (FW11) available for SmartSpeed Plus timing gates. Due to significant changes this feature will be rolled out gradually and may not be available to you yet. This firmware update includes:
- Improved inter-device communications.
If you choose to update your firmware, you must update all timing gates in your setup.
- In the Profiles screen, you can now review groups and profiles for a particular category if you have the Category Filter enabled (Device Settings > Category Filter).
Resolved issues
- Fixed bug where, if the starting gate was repeatedly broken in a trial, cumulative times were incorrectly calculating from the first break of the starting gate, resulting in the times on the LED to display incorrectly.
v1.16.0August 27 2024
Resolved issues
- Minor bug fixes and performance improvements.
v1.15.0July 11 2024
New and enhanced features
- We've made some improvements to trial validity tagging in SmartSpeed Plus.
- All invalid results will now be sent to the bottom of the Live results view.
- All invalid results can be clearly identified by a red flag icon next to Trial column.
- You will now be able to filter profiles and groups by a category, simplifying queue management for high testing volumes. This 'Category Filter' can be enabled through the Device Settings screen.
- The Results screen will now provide more clarity on the upload status of your trials. When only some of the trials have been uploaded to VALD Hub, you will now be able to see how many trials (and which ones) have not yet uploaded.
v1.14.1June 26 2024
Resolved issues
- Fixed bug preventing some clients from uploading their local data to VALD Support for investigation.
v1.14.0June 18 2024
Resolved issues
- Minor bug fixes and performance improvements.
v1.13.0May 20 2024
New and enhanced features
- Once you have logged in to the SmartSpeed Plus iOS app, the app will now remember your login details and keep you logged in for future sessions. This is helpful if you find yourself needing to run drills in an area with unreliable internet connection, as you would typically require an internet connection to log into the SmartSpeed Plus app.
Any drills completed while offline (i.e. not connected to the internet) will remain stored on your device until you go back online, where they will then be uploaded to VALD Hub.
- You can now disable the results display on all SmartSpeed Plus timing gates following the conclusion of a drill.
Resolved issues
- Fixed bug where the Date of Birth was saving incorrectly for some users.
- Minor bug fixes and performance improvements.
v1.12.1March 22 2024
Resolved issues
- Fixed bug with Y-Agility drills where gate breaks and LED displays were not behaving as expected.
v1.12.0March 19 2024
New and enhanced features
- You can now perform Lap Timing drills with SmartSpeed Plus timing gates.
Resolved issues
- Minor bug fixes and performance improvements.
v1.11.0February 23 2024
Resolved issues
- Minor bug fixes and improvements.
v1.10.0February 13 2024
New and enhanced features
- You can now perform Interval Protocol drills for both Fixed Duration and Fixed Recovery.
- To perform Interval Protocol drills with Fixed Duration, all timing gates must be updated to the latest firmware (F8).
- You can now perform Serpentine drills in SmartSpeed Plus.
v1.9.0January 31 2024
New and enhanced features
- You can now perform Interval Protocol drills in SmartSpeed Plus. Currently this only allows Fixed Recovery as the Interval Type, with Fixed Duration available in a later release.
- Validity tagging is now available, allowing you to mark an athlete's trial as valid or invalid in a set time after the trial is complete.
v1.8.0December 7 2023
New and enhanced features
- New drill configurations are now available in the SmartSpeed Plus app. These include:
- Duration based jumps
- Duration based free timing
- Free free timing
- New firmware update (FW07) available for SmartSpeed Plus timing gates. This includes:
- Enhanced inter-gate communication.
- Increased auto time off for timing gates to 30 minutes following the conclusion of a drill.
Important note: If you choose to update your firmware as recommended, you must update all SmartSpeed Plus timing gates. Failing to do so will result in your timing gates being incompatible, and you will be unable to connect to all gates in a session.
Resolved issues
- Fixed bug where an error was occurring if gates were reconfigured without closing the app.
- Fixed bug where the configuration settings for custom change of direction drills were not mapped correctly.
v1.7.0November 13 2023
New and enhanced features
- In addition to the reset button in-app, you can now retrigger the start of a trial by having the athlete pass through the first gate again.
- Retriggering the start will work for sprint drills with break-beam start only.
- Trials cannot be retriggered if the final gate has been passed.
v1.6.2November 1 2023
New and enhanced features
- Change of Direction override can now be completed during testing (for planned and unplanned trials).
- Gate letter is now displayed on SmartSpeed Plus timing gate LED panel when planning direction for Change of Direction drills.
- For break beam starts, the first gate will now beep when an individual passes through.
Resolved issues
- Fixed bug for gate layouts where all tracks were incorrectly stating "Track 1". Tracks will now increase incrementally as expected.
- Fixed bug that was causing app crashing after 60 minutes of use with reactive start drills.
- Fixed bug to ensure that the delay is now randomised for reactive start.
v1.6.1October 13 2023
Resolved issues
- For planned Change of Direction drills, the direction is now responsive to user prompted as expected.
v1.6.0September 20 2023
New and enhanced features
- Users can now set up tracks using their SmartSpeed Plus timing gates.
v1.5.0August 3 2023
New and enhanced features
- Users can now create profiles in the SmartSpeed Plus app. Profiles can be created through the Profiles menu and during a drill setup.
- If creating profiles offline, all data is saved locally on the device and will be uploaded to VALD Hub once you return to Internet connection and the Sync button is selected.
Resolved issues
- Fixed issue where jump drills could be configured without an accessory adapter connected to a timing unit. This will now prevent users from accidentally setting up a jump drill without the accessory adapter (and SmartJump) connected.
- Fixed bug where rep counter was not showing for duration-based free timing drills. Users will now be able to see how many reps are remaining before a drill is complete.
- Fixed bug where a rep counter was incorrectly displaying for non-rep-based drills, such as sprints.
v1.4.0July 5 2023
New and enhanced features
- Users can now configure and run jumps using SmartSpeed Plus. Choose from eight preconfigured jump types or create your own custom jump type in VALD Hub.
- Users can now update the firmware of each of their SmartSpeed Plus devices.
v1.3.0May 15 2023
New and enhanced features
- Free Timing Drills
- This includes the pre-configured drills (i.e. 5-0-5) and custom drills. Please note these are only REP-based Free timing drills. Duration-based and Free drills are coming soon.
- Results are only saved if the drill is completed.
- RFID Profile Queue functionality.
- SmartScan and SmartJump / SmartPad can be used simultaneously.
- SmartScan must be connected to the first gate in the layout (does not have to be the primary).
- Improved SmartJump / SmartPad start functionality, comparable to in-beam start. 3s hold before drill commences to minimise false starts.
- Reactive Pro Agility behaviour has been improved.
- CSV export updated to include 4 splits and reactive time.
- Actual and expected direction displayed in results.
- Trial number now available in CSV Export.
Resolved issues
- Equal Min and Max signal delay does not cause Primary gate to disconnect.
- Minor bug fixes and improvements.
v1.1.0March 22 2023
New and enhanced features
- The prompt to align gates has been brought forward in the session set up, and now includes a link to instructions on how to align gates.
- User interface updates on both the SmartSpeed Plus app and the LED panel.
Comments
0 comments
Please sign in to leave a comment.