Replacement Instructions
| Description | Image | |
| 1 | Remove NordBord hooks |  |
| 2 | Flip NordBord gently onto its back |  |
| 3 | Unplug sensor to be replaced |  |
| 4 |
Use large Hex Wrench to unscrew 3x bolts from Sensor Module Note: do not dispose of bolts |
 |
| 5 | Remove Sensor Module |  |
| 6 | Install new Sensor Module |  |
| 7 | Use large Hex Wrench to reinstall 3x bolts into Sensor Module |  |
| 8 | Plug sensor into PCB module |  |
| 9 | Flip NordBord back over gently and reinstall Hooks |  |
Comments
0 comments
Please sign in to leave a comment.