The DynaMo V2 app provides an updated workflow for strength testing. This guide walks you through configuring and recording a strength test with your DynaMo Plus, Lite or Max device.
Before you begin
The DynaMo V2 app is only available for compatible iOS devices. Visit Download the DynaMo app to view all requirements and install this app version on your iPhone or iPad.
For DynaMo Plus and DynaMo Max, you will also need to connect the appropriate attachments to both ends of your device before conducting a test.
Set up your test
- Open and log in to the DynaMo V2 app on your device.
- Press Start testing.
- The app will begin searching for your DynaMo. Once it appears, select your hardware from the list. A green check mark will be displayed to indicate your device is connected.
-
Select a profile from the list, or create a new one using the
button.
Can't find the right profile? If you've created a profile elsewhere (e.g. VALD Hub), you may need to refresh the profile list using the sync button in the top-right.
-
Add one or more test types to your session. Selecting a bilateral test type will automatically add both left and right side tests to the queue.Use the Previously tested tab to quickly access past test types recorded for the selected profile.Navigate to the Test batteries tab to create a new test battery or add an existing battery to the queue.
- Once satisfied with your test queue, press Continue.
Record your test
- On the testing screen, your test queue is displayed in the left side panel. Select a test from the queue to begin.
If you notice any unusual movement/fluctuation on the graph before any force is directly applied to the DynaMo, zero the device by pressing
in the bottom-left corner.
- Perform the test on the appropriate side, using the correct protocol for the test you selected.
To check out the results during testing, use the button to pause your session.
From this view you can delete a rep: tap a rep on the bar graph in the results pane to bring up the edit and delete menu. Note that editing a rep is not currently available in the Beta version of the app.
If you need to re-do a test in progress, tap the arrow icon on the test tile to erase all existing rep data and start over.
-
After recording the test for any number of repetitions, press
to move on to the next test in the queue.
Alternatively, you can manually select another test type from the queue to proceed in a custom order. -
Once you have recorded one or more tests, you can finish the session using the
button in the top-left.
If you have completed your entire test queue, an additional
button will be available in the in the bottom-right.
View and upload results
Finalizing your results using either of the Finish buttons will bring you to the following Test Summary view.
Press to send the test data to the Upload Manager and sync to VALD Hub.
Comments
0 comments
Please sign in to leave a comment.