The DynaMo Plus and DynaMo Max have a range of attachments that can be connected directly to the DynaMo unit. Attachments allow you to configure your DynaMo in a number of ways for different types of strength tests.
Connect DynaMo Plus attachments
- Turn on your DynaMo Plus device by pressing the power button until you hear a beep.
- Line up the pair of pins on the attachment with the holes in the base of the DynaMo Plus.
- Slide the attachment in, gently pushing, then twist to lock in place.
DynaMo Plus Smart Attachments use Near Field Communication (NFC), which enables the device to automatically detect which attachment you have connected and to which end of the device.
Check the display to confirm the attachment was successfully identified.
To remove the DynaMo Plus attachment, hold down the lock/unlock buttons at the same time. Twist the attachment and pull to remove it from the unit body.
Choose the right DynaMo Plus attachment
Unsure which attachments to use for a test? Our DynaMo Plus protocols can help you identify the attachments required for every single strength test type.
|
Curved pad Suited for compression strength assessments to apply contact against a contoured surface (e.g. forearm, shin, wrist, ankle). |
|
|
Flat pad Suited for compression strength assessments to apply contact against a larger body surface area (e.g. thigh or trunk). Can also be used against a flat surface (in conjunction with the curved pad) to provide resistance for a fixed point compression test. |
|
|
Palm pad Suited for compression strength assessments, specifically on the non-tester end. Allows the practitioner to provide appropriate resistance with their bracing hand. |
|
|
Tension links (x2) Suited for attaching to both ends of the DynaMo for fixed point tension tests. Used in conjunction with included carabiners, strength strap, and handle or ankle strap attachment. |
|
|
Grip Suited for grip strength assessments. The smaller 'inner handle' connects to the tester end while the 'outer handle' connects to the non-tester end of the DynaMo. |
Connect DynaMo Max attachments
- Line up the cut-out on the attachment with the grey VALD logo on either side of the DynaMo Max device.
- Slide the attachment in, gradually pushing until you hear it click into place.
To remove the DynaMo Max attachment, gently pull to unlock and remove it from the unit body.
Choose the right DynaMo Max attachment
Unsure which attachments to use for a test? Our DynaMo Max protocols can help you identify the attachments required for every single strength test type.
|
Curved pad Suited for compression strength assessments to apply contact against a contoured surface (e.g. forearm, shin, wrist, ankle). |
|
|
Flat pad Suited for compression strength assessments to apply contact against a larger body surface area (e.g. thigh or trunk). Can also be used against a flat surface (in conjunction with the curved pad) to provide resistance for a fixed point compression test. |
Comments
0 comments
Article is closed for comments.