Edit or re-assign a test in VALD Hub

You can quickly edit or re-assign a test in VALD Hub after it has been uploaded. This is useful if you have selected the incorrect profile or test type before starting your test.

The details you can edit on your test will depend on the system you are using, as outlined below.

	DynaMo	ForceFrame	NordBord	SmartSpeed
Profile
Test Type
Position

If your system is not listed, you are not able to edit tests in VALD Hub.

Select the test

You can locate the relevant test result through two different views – Results Export and Result Table.

Results Export Dashboard > Results Export
Navigate to the Dashboard view from the side navigation menu, click the drop-down arrow at the top and choose Results Export. Select the system (DynaMo, ForceFrame, NordBord, SmartSpeed) from the available list. Set the appropriate test type and date parameters to locate your test.

Result Table
Profile > Result Table

1. Navigate to the Profiles view from the side navigation menu and locate the profile.
2. Click on the profile to open their individual profile page.
3. Navigate to the Result Table tab at the top, selecting the appropriate system, test type and date parameters to locate your test.

Edit or re-assign the test

1. Select the test by clicking the profile initials on the left.
2. Click the Edit Test button in the top-right.
3. Update the test with the correct details or reassign the test to a new profile.
4. Click the button.

If you are editing the drill type for a SmartSpeed test, this will apply to all tests in the session, not just the selected test.

The test result will now be updated with the changes you have made. If you have changed the profile, this test will now be visible in the correct profile.