Edit a test in VALD Hub

If you are conducting tests using a ForceFrame, NordBord, or SmartSpeed system, you have the ability to edit the test after the data has been uploaded to VALD Hub. This is useful if you have selected the incorrect profile or test type before starting your test.

The details you can edit on your test will depend on the system you are using, as outlined below.

Select the test

You can locate the relevant test result either in the Dashboard view, or directly from the patient's profile.

From the Dashboard:

In the Dashboard section, click the drop-down arrow at the top and choose Results Export.

Select your system (ForceFrame, NordBord, or SmartSpeed) from the available list. Set the appropriate Test Type and date parameters to locate your test.

From the patient's profile:

In the Profiles section, locate your patient, utilizing the search bar and group drop-down if necessary.

Click to open the patient's individual profile page, then navigate to the Results Table option at the top, selecting the appropriate system and date range to locate your test.

Edit the test

1. Click the patient's initials on the left to select the test, then click Edit Test in the top-right.
2. Update the details of the test using the drop-down menus for Profile, Test Type (ForceFrame / NordBord) and Position (ForceFrame).
3. Click Save.

The test result will now be updated with the changes you have made. If you have changed the profile, this test will now be visible in the correct profile.