System
AirBands DynaMo ForceDecks ForceFrame HumanTrak NordBord SmartJump SmartSpeed TeleHab VALD Hub
Contact us

Search

Charging your ForceDecks (V.2)

Greg Marusic
  • Updated
The following information for charging your ForceDecks (V.2) plates is covered below:

Battery specifications

About your ForceDecks (V.2) battery:

Approximate battery life (from full charge)
  • 50+ hours (FDLite and FDMax)
  • 20+ hours (FDMini)  
Approximate charge time (from empty charge)
  • 24 hours (approximately)
Charging equipment
  • Mini-USB cable (4m)
  • USB wall adapter (optional)
Charging methods
  • Plugged into USB port of computer
  • Plugged into USB wall adapter (mains power)
Important notes
  • Do not charge a device if your Mini-USB cable or wall adapter are damaged.
  • While other brands of wall adapter may successfully charge your device, we recommend only using VALD supplied adapters.
  • Your ForceDecks will automatically turn off after a period of inactivity.

Note: Charging pauses after 10 hours of continuous charging in order to protect the battery from overcharging. If charging is paused then unplug the mini-USB cable and plug it back in to restart the timer.

Battery status indicators

Your ForceDecks battery will be partially charged when you receive it. The different statuses of the battery indicator are listed below:

Turned off / No charge: No Lights FD_Charge_1.png
Medium Battery: Amber Light FD_Charge_2.png
Low Battery: Red Light FD_Charge_3.png
Full Battery: Green Light FD_Charge_4.png

 

Charging ForceDecks

To charge your ForceDecks battery:

1 Plug the small end of the USB cable into the Left ForceDecks Plate FD_Charge_5.png
2 Plug the large end of the USB cable into either:
  • The USB port of your computer
  • The USB Wall Adapter, then plug the Wall Adapter into a wall socket
 FD_Charge_6.png

Comments

0 comments

Article is closed for comments.

Related articles