Change a test type in ForceDecks iOS

When recording tests using ForceDecks iOS, there may be some instances where you will want to change the test type of a recorded rep.

Potential reasons for changing a test type of a recorded rep may be:

• You have performed a test using "Auto Detect" that is not automatically detected, resulting in a default test type being assigned to the rep.
• A protocol different to the test type selected was performed by the individual.
• ForceDecks has analysed the force trace and labelled the rep with a different test type to what you expected.

When performing tests with ForceDecks, always ensure the proper protocol steps are being followed to allow for accurate rep detection and analysis.

Edit a test

1. After you have finished recording your testing, click Stop, then Finish.
2. In the Post Testing Summary screen, select the Rep that you would like to change.
3. Select "Change test type" from the options provided.

4. Search for and select the new test type you would like to apply to this rep and click Done.

Data will be re-analysed for the new test type after you confirm your selection. If you then select Back in the top-left, you will see updated metrics applicable to the new test type you selected.

5. Click Upload to save this data in VALD Hub.